Production and sales of special industrial adhesive materials

Product Solutions

New energy battery materials field

Semiconductor process field

Optical component manufacturing field

Consumer Electronics Field

HS-1032

Classification:

Positive high temperature tape

Product Consulting

· Product description:

Substrate: Polyimide film
Rubber system: rubber
Color: Coffee
Specifications:(13mm) width (400M,500M) length

· Product characteristics:

Polyimide substrate and rubber-based pressure-sensitive adhesive are used, which has good temperature resistance and is well attached to the substrate after peeling at 100 ℃/2h. In the electrolyte, it has the characteristics of good swelling resistance, precipitation resistance, stable adhesive layer state and stable peeling force. The electrochemical cycle voltage is stable after the battery core is made, and the problem of tape blackening after cycle charge and discharge is solved. Effectively solve the problem of reduced battery life and short-circuit of the battery caused by carbonization and precipitation of the tape after cycle charging and discharging.

· Product Application:

Suitable for all kinds of steel shell, aluminum shell, soft package, polymer battery core pole piece part of the adhesive protection.

Technical parameters:

Project	Unit	Specification value	Test Method
substrate thickness	mm	0.025±0.003	GB/T 7125-2014
Total thickness	mm	0.032±0.005	GB/T 7125-2014
Peeling force at room temperature	N/10mm	≥ 0.2	GB/T 2792-2014
Tensile Strength	Mpa	≥ 120	GB/T 30776-2014
Temperature resistance	/	The adhesive tape shall be free of foundation and deformation	Laminating aluminum foil at 100 ℃/2H, standing for 2H under constant temperature and humidity, and peeling off
Corrosion resistance	/	The substrate shall be free of fading and deformation, and the adhesive layer and substrate shall be free of dissolution.	Bare bubble of high temperature adhesive tape in the normal temperature sealed electrolyte for 24H, and then take it out for visual observation.

· Preservation conditions and duration:

○ Store at room temperature, avoid direct sunlight, freezing and high temperature, and do not squeeze or damage the package.
○(20 ℃ ± 10 ℃)*(≤ 80% RH) under the condition of temperature and humidity, the validity period is 12 months from the date of coating and 6 months from the date of shipment.

Keywords： HS-1032

Products Recommended

Product Consultation